ADG Aero Distribution Group
Back to products

Resins

Dynea Prefere 4050M Adhesive 1Kg

Dynea Prefere 4050M Adhesive 1Kg is Dynea material supplied in 1Kg. The source listing describes it as prefere 4050 is supplied in three grades: F (Fast), M (medium) and S (Slow); hardener Prefere 5750 is used with each grade. Prefere 4050 liquid resins mixed with hardener Prefere 5750, a resinous liquid containing filler.

Dynea Prefere 4050M Adhesive 1Kg

Documents

Technical and safety data

Request the relevant product documents through ADG so technical, safety and traceability requirements can be confirmed.

TDSRequest technical data sheet SDSRequest safety data sheet CoC / batchRequest traceability documents

Product information

Adhesive bonding

Dynea Prefere 4050M Adhesive 1Kg is a 1Kg product from Dynea. The source listing describes it as prefere 4050 is supplied in three grades: F (Fast), M (medium) and S (Slow); hardener Prefere 5750 is used with each grade. Prefere 4050 liquid resins mixed with hardener Prefere 5750, a resinous liquid containing filler. ADG will confirm current TDS, SDS, CoC, batch, shelf-life and traceability requirements during RFQ.

BondingAdhesive requirements handled with technical documentation checks.
Cure planningApplication timing and storage reviewed before supply.
Document supportTDS, SDS and traceability requirements captured.

Full product record

Technical details, specifications and compliance notes

For technical buyers
01Product description

Dynea Prefere 4050M Adhesive 1Kg is a 1Kg product from Dynea. The source listing describes it as prefere 4050 is supplied in three grades: F (Fast), M (medium) and S (Slow); hardener Prefere 5750 is used with each grade. Prefere 4050 liquid resins mixed with hardener Prefere 5750, a resinous liquid containing filler. ADG will confirm current TDS, SDS, CoC, batch, shelf-life and traceability requirements during RFQ.

02Product properties
Pack Size1Kg
BrandDynea
Manufacturer NameDynea
Also Known AsAerodux 500 Adhesive
UN Number1866 CL3
Commodity Code35069190
Country of OriginUnited Kingdom
03Technical information

Prefere 4050 adhesives are also suitable for use in the production of heat resistant composite structures, e.g. fire-resisting doors. They are resistant to acids, weak alkalis, solvents and boiling water. Prefere 4050 resins with hardener Prefere 5750 meet the requirements of EN 301-Type1 and BS 1203 (Type WBP). Prefere 4050 has been tested according to the German Standard DIN 68 141 by the MPA, Otto-Graf-Institut in Germany and found to suited for gluing load-bearing wooden structures for indoor and exterior use in accordance with DIN 1052.

04Specifications

Full listing title: Dynea Prefere 4050M Adhesive 1Kg

Specifications should be confirmed against the current manufacturer TDS, AMM or OEM documentation before use.